DeBeurs.nl

voda 13 november 2019 16:18

0

JSW Steel Reports 13% YoY Fall in Crude Steel Production in October

JSW Steel has reported significant YoY decrease in crude steel and long product production in October. It said "The extended monsoon rains impacted production both at Dolvi and Vijayanagar locations. The company has taken temporary shutdown of one of the blast furnaces at Salem location due to slowdown in demand from auto sector.”

Voor cijfers, zie pdf.

Source : Strategic Research Institute

Bijlage:

voda 13 november 2019 16:19

0

ArcelorMittal Poland to Stop Krakow BF

ArcelorMittal Poland announces that it is forced to temporarily stop hot metal part of the Krakow steelworks and that it will begin November 23, 2019. Mr Geert Verbeeck, CEO of ArcelorMittal Poland, said “Our three blast furnaces are currently operating at the technological minimum, which means that further reduction of production volume is not an option. The market situation is still getting worse. and the forecasts are not optimistic, which is why we have no choice. Unfortunately we have to temporarily stop the blast furnace in our Krakow steelworks.”

The blast furnace and steel mill in Krakow's steelworks were out of service from August 2010 to March 2011 and were restarted as soon as the market situation improved.

ArcelorMittal Poland maintains its previous position regarding the desire to resume operation of the blast furnace and steel mill in Krakow, as soon as market conditions improve enough that commissioning the installation will be economically optimal.

Source : Strategic Research Institute

Bijlage:

voda 13 november 2019 16:21

0

voestalpine Hydrogen Pilot Facility Successfully Commences Operation

World’s largest pilot plant for the CO2-neutral production of hydrogen has successfully commenced operation at the voestalpine site in Linz, simultaneously setting an international milestone in the advancement of new energy supply options. As part of the EU-funded H2FUTURE project, partners voestalpine, VERBUND, Siemens, Austrian Power Grid, K1-MET and TNO are researching into the industrial production of green hydrogen as a means of replacing fossil fuels in steel production over the long term.

Global climate goals aim to almost completely eliminate CO2 emissions by 2050. This poses challenges for industrial enterprises and energy suppliers, and demands new technological solutions in both sectors. In this context, CO2-neutral hydrogen is regarded as the most promising future option for facilitating the energy transition. Now the world’s largest and most advanced electrolyser has commenced production of green hydrogen at the voestalpine premises in Linz. The new plant has a capacity of over 6 megawatts, and is currently regarded as the most effective and state-of-the-art facility of its type. It will be used to test whether the technology deployed to produce green hydrogen is suitable for use on an industrial scale. Furthermore, the project, which receives EUR 18 million in EU funding, will investigate the potential to provide network services, and potentially compensate for fluctuations in the power grid.

In light of global climate targets, voestalpine is currently investigating the practicality of a hybrid technology to bridge between the existing coke/coal-based blast furnace route and electric arc furnaces powered with green electricity partly generated using green hydrogen. If economically feasible, from today’s perspective this option would reduce the Group’s CO2 emissions by around a third sometime between 2030 and 2035. Over the long-term, voestalpine is striving to successively increase the use of green hydrogen in the steel production process, allowing the Group to reduce its CO2 emissions by a total of over 80% by 2050.

Source : Strategic Research Institute

voda 13 november 2019 16:22

0

NLMK sees Russian Domestic Steel Demand Growth at 3-5% in 2019

Russian steel producer NLMK expects steel demand growth in Russia in 2019 to stand at 3-5% due to support from the domestic construction sector. NLMK Commercial Director Mr Sergey Horn said “The introduction of escrow accounts in the Russian construction industry in July compelled builders to buy more metal in the first half of this year. We expected demand to slow in a sharper way from July or August. But we didn't see this happen. The indicators are very good, we are seeing demand growth across all product categories."

NLMK expects domestic demand growth to slow to 2-3% next year and to stabilise at an annual 2% for the subsequent few years.

Source : Strategic Research Institute

voda 13 november 2019 16:25

0

Sandvik to Deliver CRA OCTG to Tenaris for ADNOC Supply

Producer of advanced stainless steels, special alloys, titanium and other high-performance materials Sandvik has entered into a long-term agreement with Tenaris to supply OCTG following its award from ADNOC in August 2019. The award includes a relevant portion of Corrosion Resistant Alloy materials, which will be supplied by Sandvik as part of the Sandvik-Tenaris Alliance Agreement. Sandvik produce all OCTG materials from melt to finished products at the manufacturing facility in Sandviken, Sweden. Sandvik will be supplying primarily Sanicro® 28 UNS N08028 in dimensions from 3½ to 7 inches outer diameter. Sanicro® 28 is a high-alloy multi-purpose austenitic stainless steel for service in highly corrosive conditions. Due to outstanding characteristics such as excellent resistance to sulfide stress cracking and chloride induced stress corrosion cracking as well as high resistance to pitting and crevice corrosion, Sanicro® 28 OCTG fits well for the demanding environments of Abu Dhabi wells.

ADNOC has awarded Tenaris a long-term contract for the provision of tubulars and Rig Direct services over the next five years, with the possibility of a two-year extension. It includes the supply of a full array of steel grades and connections, including dopeless technology, to support ADNOC’s onshore and offshore E&P expansion projects. In many parts of Abu Dhabi, the well environments are extremely corrosive, making requirements for CRA materials necessary.

Source : Strategic Research Institute

voda 13 november 2019 16:26

0

POSCO Launches Innovilt Steel Brand

POSCO has launched the integrated structural steel brand Innovilt, a combination of innovation, value and built, embodies eco-friendly and future technologies for structural steel widely used in the construction industry. POSCO said it decided to launch an integrated brand so construction experts and end users could easily recognize and select POSCO's structural steel materials. Under the slogan Build the Next, Let's INNOVILT, POSCO vowed to increase the reliability of its steel products by achieving shared growth with its client companies. POSCO said it will select Innovilt products based on comprehensive technical judgment and marketability among the company's structural steel materials.

Some of POSCO's high-performance steels include HSA650, POSCO Magnesium Alloy coating PosMAC and POSCO's advanced resolution printing technology PosArt. HSA650 is an earthquake-resistant steel for construction. It is strong, resilient and has high welding capabilities. PosMAC is five to 10 times more corrosion-resistant than standard steel. And PosArt allows the printing of high-definition designs four times the resolution of a normal steel printer. It uses eco-friendly steel ink and can add dimension to steel plates, making them look like 3D material.

Source : Strategic Research Institute

Bijlage:

voda 13 november 2019 16:28

0

India Ratings Cuts JSW Steel's Outlook

India Ratings has affirmed JSW Steel’s long term issuer rating at IND AA but the outlook has been revised to Negative from Stable since the last rating was issued in March. citing an expected increase in the steel major’s net debt-based leverage. It said “JSW Steel’s adjusted net debt to Ebitda is expected to rise to 3.5 - 3.7 times this financial year on the back of a decline in per tonne Ebitda and outflows on account of debt-led capital expenditure. In FY19 and FY18, the leverage was 2.2 times and 2.6 times respectively.”

The rating agency expects outflows relating to any inorganic stressed asset acquisition in FY20 to be limited toINR 5,000 crore and primarily to be executed through ring- fenced financial structures with only a minority stake byJSW Steel. India Ratings also expects JSW Steel’s FY20 liquidity to remain adequate with well-planned debt refinancing amid substantial capital expenditure outflows.

JSW has announced reduction in the budgeted capital expenditure by about INR 4,700 crore to about INR 11,000 in FY20 as a measure to conserve cash in the background of benign economic situation. The company has also deferred capex at its Baytown, Texas facility by around USD 240 million of the announced USD 500 million.

Source : Strategic Research Institute

voda 13 november 2019 16:29

0

ArcelorMittal Kryvyi Rih Update on Modernization

Despite reduced cash flow, ArcelorMittal Kryvyi Rih has maintained a high rate of investment in modernization during January to September 2019. It spent USD 282 million in 9 months and expects the investments to touch USD 390 million in 2019. Some of the main projects include reconstruction of small grade mill No 250-4, continuous billet casting machine No 2 & 3, reconstruction of the second sinter plant and an electric blower manufactured. For its mining department, ArcelorMittal Kryvyi Rih continues to acquire large-sized mining equipment for ore mining and transportation, new equipment for crushing and concentration plants, as well as mines.

The company plans to complete its key projects this year and start new ones including the reconstruction of the first block of the converter shop converters No 1-3, the modernization of the largest blast furnace No 9, the construction of a pelletizing plant.

Source : Startegic Research Institute

Bijlage:

voda 13 november 2019 16:32

0

AISI Update on Raw Steel Production in US in Week 45

In the week ending on November 9, 2019, domestic raw steel production was 1,862,000 net tons while the capability utilization rate was 80.5%. Production was 1,903,000 net tons in the week ending November 9, 2018 while the capability utilization then was 81.2 percent. The current week production represents a 2.2% decrease from the same period in the previous year. Production for the week ending November 9, 2019 is down 1.4 percent from the previous week ending November 2, 2019 when production was 1,888,000 net tons and the rate of capability utilization was 81.6%.

Adjusted year-to-date production through November 9, 2019 was 83,461,000 net tons, at a capability utilization rate of 80.3%. That is up 2.4% from the 81,484,000 net tons during the same period last year, when the capability utilization rate was 78.1%.

Broken down by districts, here's production for the week ending November 9, 2019 in thousands of net tons: North East: 209; Great Lakes: 670; Midwest: 178; Southern: 729 and Western: 76 for a total of 1862.

Source : Strategic Research Institute

voda 13 november 2019 16:37

0

Kumba Iron Ore Cuts 2019 Total Sales Guidance on Saldana Closure

Following AMSA’s decision to wind down its steel operations at Saldanha, Kumba has reduced the 2019 total sales guidance to 41.5-42.5 million tonnes from 42-43 million tonnes. The production guidance for the full year 2019 is unchanged at 42-43 million tonnes.

Kumba said that it will continue to assess the effect of AMSA’s strategic asset footprint review on domestic sales and will update the market in due course. Importantly, export sales contribute 94% towards the company’s total sales and Kumba’s high-quality iron ore products are well-positioned in global markets with ongoing customer demand and a stable export order book.

Source : Strategic Research Institute

voda 14 november 2019 12:13

0

Staallobby tegen Chinese redding British Steel

Gepubliceerd op 14 nov 2019 om 12:06 | Views: 0

ArcelorMittal 11:39
14,97 -0,24 (-1,58%)

LONDEN (AFN/RTR) - De redding van British Steel door het Chinese Jingye zal de concurrentie op de staalmarkt verstoren. Dat zegt de Europese staalassociatie Eurofer, die een bezwaar wil indienen bij de Europese Commissie tegen de overname van het in problemen geraakte staalbedrijf.

Jingye zou het eerste Chinese bedrijf zijn dat een staalconcern binnen de Europese Unie overneemt. Het industriebedrijf bereikte onlangs een voorlopige overeenkomst voor de koop van British Steel. Mededingingsautoriteiten moeten de deal echter nog goedkeuren. British Steel is goed voor duizenden banen. Ook FN Steel in Alblasserdam is onderdeel van het concern.

De betrokkenheid van China, een van de grootste staalproducenten ter wereld, ligt gevoelig. Staalprijzen staan al een tijd onder druk door overaanbod. Volgens Eurofer is minstens twee derde daarvan afkomstig uit China. Europese staalproducenten als ArcelorMittal klagen doorgaans over de concurrentie van goedkoop buitenlands staal, dat wordt gedumpt in Europa. China ontkent daarbij betrokken te zijn.

voda 14 november 2019 16:49

0

'Arcelor sluit Ilva-fabriek op 15 januari'

Gepubliceerd op 14 nov 2019 om 16:27 | Views: 598

ArcelorMittal 16:28
14,90 -0,31 (-2,05%)

TARENTE (AFN/BLOOMBERG) - ArcelorMittal is van plan zijn Ilva-staalfabriek in de Zuid-Italiaanse stad Tarente te sluiten op 15 januari. Dat meldden de vakbonden.

Volgens de vakbond Fim-Cisl gaat ArcelorMittal tot die datum de productie afbouwen. Dat zou de topman van de Italiaanse tak van het staalbedrijf hebben gezegd. De laatste tijd is er veel gedoe rond de Ilva-fabriek. Eerder deze maand maakte ArcelorMittal bekend de fabriek terug te willen geven aan Italië. Het intrekken van bescherming tegen milieuclaims rond de Ilva-fabriek was daar de reden voor, liet het bedrijf weten.

De Italiaanse regering zou nu overwegen de Ilva-fabriek te redden met een overbruggingskrediet als ArcelorMittal definitief afziet van de overname. De lening zou 700 miljoen tot 800 miljoen euro bedragen. Dit moet de failliete fabriek draaiende houden terwijl curatoren er weer de controle overnemen.

voda 14 november 2019 17:11

0

Duitse autobouwers investeren in VS, Trump ziet af van heffing

Duitse autoproducenten willen extra investeren in de bouw van auto's in de VS. In ruil daarvoor lijkt de Amerikaanse president Donald Trump bereid voorlopig af te zien van strafheffingen op auto's uit Europa.

Werknemer in BMW-fabriek in South Carolina controleert een SUV.Foto: Charles Mostoller/Reuters

Trump dreigt al enige tijd de invoerheffingen op Europese auto's te verhogen naar 25%. In mei stelde hij een besluit daarover uit tot november. Volgens Bloomberg zal de president het besluit nogmaals uitstellen vanwege de investeringen. De onmiddellijke dreiging is daarmee van tafel.

Juncker optimistisch
De afzwaaiende voorzitter van de Europese Commissie, Jean-Claude Juncker, zei een week geleden al stellig dat de heffingen niet doorgaan. 'Trump zal veel lawaai maken, maar er komen geen autotarieven,' wist hij.

Als Trump de strafheffingen alsnog invoert, kan dat tot een gevaarlijke escalatie van het sluimerende handelsconflict met Europa leiden. Door de heffing worden Europese auto's in de VS duizenden dollars duurder. Brussel dreigde als tegenmaatregel met strafheffingen op Amerikaanse export ter waarde van $39 mrd.

Toch lijkt een groot conflict met Europa niet in het belang te zijn van de president, die zijn handen nog vol heeft aan de handelsoorlog met China. Het overleg met Peking over een eerste deelakkoord is vanwege onderlinge meningsverschillen nog altijd niet afgerond.

Duitse export geraakt
Een deze week in economenblad ESB gepubliceerd onderzoek laat opnieuw zien dat de strafheffingen de Duitse automobielindustrie het zwaarst treffen. De auto-export van de Bondsrepubliek naar de VS zal daardoor met $18 mrd dalen, die van de EU als geheel met ruim $28 mrd. De totale autoproductie in Duitsland zou met 4,2% teruglopen.

De Duitse auto-industrie heeft door het dieselschandaal al flinke klappen opgelopen en zit niet te wachten op Amerikaanse strafheffingen. De bedrijven zouden bereid zijn de portemonnee te trekken om dat onheil af te wenden. De Duitse economie scheerde mede door de problemen in de auto-industrie langs de rand van een recessie.

Banen in VS
De Amerikaanse ambassadeur in Duitsland, Richard Grenell, was de afgelopen maanden betrokken bij pogingen om Duitse autoproducenten tot investeringen in fabrieken en banen in de VS te bewegen. Als BMW, Daimler en Volkswagen dat doen, zo was de boodschap, kunnen ze invoering van de strafheffingen geheel of gedeeltelijk voorkomen.

Dat is ook in het belang van de VS, zo viel op te maken uit opmerkingen die de ambassadeur vorige week tegen het Duitse Handelsblatt maakte. De Duitse autobouwers zijn direct en indirect goed voor 200.000 banen in de VS. Een handelsoorlog kan die banen in gevaar brengen. 'Daarom is het belangrijk dat wij met elkaar blijven spreken,' aldus de ambassadeur.

Elektrische SUV's
De eerste concrete stappen om de productie in de VS uit te breiden zijn al gezet. Volkswagen investeert $800 mln in de uitbreiding van zijn fabriek in Chattanooga in Tennessee. De eerste symbolische schop daarvoor ging woensdag de grond in. De fabriek voor elektrische SUV's levert duizend nieuwe banen op.

Daimler, het moederbedrijf van Mercedes-Benz, is van plan $1 mrd te investeren in zijn fabriek in Tuscaloosa in Alabama. Dat zou nog eens 600 nieuwe banen opleveren. Ambassadeur Grenell bezocht eind oktober de BMW-fabriek in Spartanburg in South Carolina 'om te horen over nieuwe investeringen', zo meldde hij op microblog Twitter.

Als de strafheffingen met een aantal concessies kunnen worden voorkomen, is het de tweede keer in anderhalf jaar tijd dat Brussel erin slaagt grote escalatie van de handelsspanningen met de VS te voorkomen. De eerste keer was in juli 2018, toen Juncker Trump paaide met beloften over de import van sojabonen en vloeibaar gas uit de VS.

fd.nl/economie-politiek/1324373/duits...

voda 14 november 2019 17:24

0

ArcelorMittal 2019 Q3 - Results - Earnings Call Presentation
Nov. 14, 2019 10:42 AM ET | About: ArcelorMittal (MT)

Q3: 11-07-19 Earnings Summary
Press Release Transcript
EPS of $-0.53 misses by $-0.24 Revenue of $16.63B (-10.19% Y/Y) misses by $-69.79M
The following slide deck was published by ArcelorMittal in conjunction with their 2019 Q3 earnings call.

seekingalpha.com/article/4306611-arce...

51 slides met informatie

voda 14 november 2019 17:26

0

ArcelorMittal upped at KeyBanc on easing costs, inflecting spot steel margins

Nov. 13, 2019 11:02 AM ET|About: ArcelorMittal (MT)|By: Carl Surran, SA News Editor

ArcelorMittal (MT -1.6%) trades lower despite winning an upgrade to Overweight from Sector Weight with a $21 price target at KeyBanc, seeing easing input costs helping margins vs. spot steel as well as a potential path to exit its troubled Ilva assets.

KeyBanc's Philip Gibbs says that following recent due diligence, including his firm's Q4 "SoS" survey, estimates rise on primary carbon sheet spreads on better mill supply discipline against easing de-stocking pressures and subdued raw materials.

Gibbs says Overweight-rated Nucor (NUE -0.6%) and Reliance Steel (RS +0.1%) are his favorite through-cycle investments, while MT's valuation vs. trough EBITDA has become "intriguing."

MT's average Sell Side Rating and Seeking Alpha Authors Rating are both Bullish, while its Quant Rating is Neutral.

voda 14 november 2019 19:30

0

thyssenkrupp Materials Services Expands Service Offering in Poland

thyssenkrupp Materials Poland has further expanded its regional warehouse in the north of the country. The new facility in Nowe Mazy, which recently went into operation, is already the second stage of expansion with around 13,500 square meters of storage space. In the first construction phase, a new warehouse with around 17,500 square meters went into operation in 2017. Together with the other regional warehouses in Blonie, Dabrowa Gornicza and Poznan, Nowe Mazy now provides the company with a unique logistics network for supplying its customers throughout Poland at short notice. In addition, the company has 16 sales offices in almost all parts of the country. The product portfolio includes rolled steel, non-ferrous metals, quality steel, aluminum, plastics and stainless steel. In addition, the Polish company can look forward to a very special anniversary. For 25 years thyssenkrupp Materials Poland has been one of the leading materials and service companies in the industry.

The product portfolio includes rolled and stainless steel, nonferrous metals, plastics and pipes. Furthermore, the company offers customized services such as slitting and cut-to-length, laser and plasma cutting and sophisticated surface treatments for all products. The range of services is rounded off by just-in-time deliveries, customer consulting and individual supply chain services. A total of almost 2,000 employees work in 46 locations to meet the needs and requirements of customers.

Source : Strategic Research Institute

voda 14 november 2019 19:31

0

Metalloinvest to supply HBI and Steel Strips to TMK

Metalloinvest and TMK have signed agreements for the supply of HBI and rolled steel strips. In 2020, Metalloinvest will supply TMK with around 240,000 tonnes of HBI produced by Lebedinsky GOK. Pricing will be calculated using a formulaic method, based on scrap metal prices on the global and Russian markets. The second contract agrees the supply of around 75,000 tonnes of strips produced by Ural Steel to TMK.

Nazim Efendiev, First Deputy CEO and Sales Director of Management Company Metalloinvest, said that “These agreements extend the longstanding history of our partnership. TMK was one of Metalloinvest’s first major clients in Russia and recognised the advantages of using HBI in the production of high-quality steel. We began shipping HBI to TMK enterprises in 2015 and by the end of this year the total volume of shipments will have amounted to one million tonnes. The new HBI and strip agreements demonstrate a recognition of the quality of our steel products, as well as the shared ambition of Metalloinvest and TMK to expand our cooperation.”

Source : Strategic Research Institute

voda 14 november 2019 19:32

0

Japan Yamato steel Orders Progauge Laser Measuring System from TBK

Yamato Steel Co Ltd of Japan has ordered a PROgauge light-section system from TBK Automatisierung und Messtechnik GmbH, Graz, Austria, a company of SMS group, for its Kokyo section mill. The laser gauge will be designed to measure a wide range of medium and heavy sections, including H-beams and channels. The system will also include the SurfTec surface analysis function to detect on-line surface defects in the hot condition directly after the last mill stand. This allows inline detection of defects originating from the rolling process or from defective material, securely rules out the risk of processing defective material, and drastically reduces the frequency of manual inspections. The gauge combines two functions, shape and size measurement and surface analysis, within one unit. The high scanning rate and the great number of measuring points allows the surface to be represented in 3D. The TBK laser measuring system for Yamato Steel will start operation in December 2020.

The gauge for Yamato Steel can be retracted from the mill line into a service position. Due the space restrictions, the device will be lifted vertically from the pass line. The system for Yamato Steel will be customized to comply with the local conditions and the requirements of the customer. Due to the in-house design and manufacturing capabilities, TBK is able to comply with such highly specific requirements.

TBK supplied a gauge of similar design to Nucor Yamato Steel, U.S.A., a joint venture company between Yamato Steel and Nucor. The successful project execution, the smooth start-up and the good performance of the gauge at Nucor Yamato were reasons for Yamato Steel to order the gauge from TBK.

Source : Strategic Research Institute

voda 14 november 2019 19:33

0

Severstal Regulates Slab Rolling Using Machine Learning Algorithms

The sheet rolling shop for the production of tube steel at the Cherepovets Steel Mill together with Severstal Digital implemented a solution based on machine learning models that automatically adjusts the speed of slab rolling at 5000 mill. Previously, specialists in the sheet rolling workshop controlled the speed of rolling slabs manually, adjusting the speed with a rheostat. At the same time, the mill operator had to simultaneously control the unit, as well as monitor the passage and quality of the metal in order to avoid defects. When determining the rolling speed, the product mix and rolling cycles were not always taken into account, so the indicators could be underestimated and the mill did not work at full capacity.

To increase the productivity of mill 5000, a solution was developed based on machine learning algorithms. Speed control is carried out taking into account the rental mode formed in the metal tracking system, sheet length and width, roll gap, steel grade, temperature and other parameters. The model comprehensively evaluates these indicators online and sets the optimal rental speed in a given cycle. The metal condition is monitored regularly, so the parameters in each metal pass are adjusted. As a result, the maximum rolling speed indicator increases: from 3.2 m / s set by the operator to 4.5 m / s set by the machine. As a result, the number of rolled slabs is also increasing. The expected increase in mill productivity will be from 6% to 9%, depending on the rolled product mix. Besides.

Source : Strategic Research Institute

voda 14 november 2019 19:33

0

China Steel Corp Optimistic On Demand from SE Asia

Taipei Times reported that China Steel Corp gave a cautiously optimistic outlook for its business next year, citing growth from infrastructure demand in Southeast Asia and offshore wind farm development in Taiwan. Sluggish market demand and fluctuating raw material prices have plagued the steel industry since the first quarter of this year. The state-run company has witnessed a 42.29% annual decline in combined pre-tax net income to NTD 13.62 billion (USD 447.7 million) in the first nine months of the year, while revenue fell 4.94% to NTD 281.81 billion. The company said its revenue last month fell 24.04% annually to NTD 27.68 billion.

CSC executive vice president and spokesman Hwang Chien-chih told a news conference in Taipei that while demand is expected to remain flat this quarter, the industry is showing early signs of recovery, as steelmakers are cutting production and raising prices, He added that “US steelmakers have taken the lead in propping up steel prices with the Japanese following suit... It has come to a point where we can’t afford further declines adding that European industry peers have also been cutting production.

Although a US-China trade spat has cast a pall over the industry, the trend of manufacturers relocating to Southeast Asia and demand for steel for plant construction would benefit the industry, he said.

Source : Taipei Times

Vertraagd	26 feb 2025 17:35
Koers	27,970
Verschil	+1,430 (+5,39%)
Hoog	27,990
Laag	26,810
Volume	4.423.260
Volume gemiddeld	2.630.827
Volume gisteren	2.474.659

11 feb	Von der Leyen verwerpt Amerikaanse im...	2
10 feb	Trump dreigt met importheffingen op s...
09 feb	ArcelorMittal en Aperam weekwinnaars
07 feb	Deutsche Bank verhoogt koersdoel Arce...
06 feb	Beursblik: ArcelorMittal overtreft ve...
06 feb	AEX opent waarschijnlijk hoger. Let o...	2
06 feb	ArcelorMittal ziet verlies afnemen	1
05 feb	Beursblik: beter vierde kwartaal bij ...
03 feb	Deze 5 aandelen kunnen deze week voor...
03 feb	Video: optimisme beursexperts volledi...	1

Arcelor Mittal « Terug naar discussie overzicht

Nieuws en info hier plaatsen (deel 4)

Meedoen aan de discussie?

Direct naar Forum

Detail

ArcelorMittal nieuws meer